欢乐颂,女强穿越玄幻完结小说,欢乐颂小说

RENOLIN CKC
高性能CKC齒輪油
高性能CKC齒輪油
設計的功率或扭矩的傳遞變速箱只能當進行有效的過度磨損，它可以發生在高或波動負荷，尤其是在參考圓，避免。變速箱的壽命取決于最合適的潤滑油的正確選擇。齒輪油的主要功能不僅是潤滑軸承和齒輪本身，即減少摩擦，避免磨損，而且還提供保護，防止腐蝕，冷卻和密封。該RENOLIN CKC齒輪油含有精心挑選的基礎油和添加劑在配合特別關鍵的邊界摩擦條件下保護機械過度磨損。RENOLIN CKC的產品可以分為CKC潤滑油根據ISO 6743-6。
RENOLIN CKC系列潤滑油的特點：
高壓吸收和優良的耐磨保護
良好的粘度-溫度特性和優良的低溫特性
鋼鐵和有色金屬的良好的防腐保護
良好的耐老化性
與密封材料相容性好
低發泡
使用表面活性添加劑避免摩擦振動
良好的破乳性能
多用途的應用
應用：
RENOLIN CKC系列潤滑油推薦用于各種工業應用中，機械制造商推薦使用CKC型油。高應力的軸承，關節，壓力主軸，直齒圓柱齒輪和蝸桿傳動齒輪在高120度的溫度下可靠地、有效地、經濟地潤滑，這些油的使用保證了機械的安靜和平穩運行以及最佳的操作可靠性。這些油的使用也允許延長的時間間隔。請咨詢我們的應用工程師的建議，關于如何這一系列的油可以用來理順石油庫存。

RENOLIN CKC		100	150	220	320	460	680
Lubricating oil type
acc. to ISO 6743-6		CKC 100	CKC 150	CKC 220	CKC 320	CKC 460	CKC 680
acc. to DIN 51 502		CLP 100	CLP 150	CLP 220	CLP 320	CLP 460	CLP 680
Characteristics	Unit							Test method
Colour		2	3	4	4.5	5	5	ASTM D 1500
Kinematic viscosity
at 40 °C	mm²/s	94.4	145.6	214	331	468	690	ASTM D 445
at 100 °C	mm²/s	11.1	14.5	18.5	24.6	30.8	36.8	ASTM D 445
Viscosity index		102	98	96	96	95	87	ASTM D 2270
Density at 15 °C	kg/l	0.884	0.89	0.895	0.9	0.903	0.922	ASTM D 1298
Flash point, Cleveland open cup	°C	220	225	230	230	240	245	ASTM D 92
Pour point	°C	– 27	- 24	- 21	- 15	– 12	– 12	ASTM D 97
Neutralization number	mg KOH/g	0.33	0.33	0.33	0.33	0.33	0.33	ASTM D 974
Saponification number	mg KOH/g	1.3	0.84	0.84	0.84	0.84	0.84	ASTM D 94
Sulphate ash	% mass	0.1	0.1	0.1	0.1	0.1	0.1	ASTM D 874
Water content	% mass	not traceable	not traceable	not traceable	not traceable	not traceable	not traceable	ASTM D 95
Insolubles	% mass	not traceable	not traceable	not traceable	not traceable	not traceable	not traceable	DIN 51 592
Demulsification	min	< 20	< 20	< 20	< 20	< 20	< 20	DIN 51 599
Foaming,
seq. I	ml	< 10/0	< 10/0	< 10/0	< 10/0	< 10/0	< 10/0	ASTM D 892 seq. I-III
seq. II	ml	< 10/0	< 10/0	< 10/0	< 10/0	< 10/0	< 10/0	ASTM D 892 seq. I-III
seq. III	ml	< 10/0	< 10/0	< 10/0	< 10/0	< 10/0	< 10/0	ASTM D 892 seq. I-III
Copper corrosion	degree of corr.	1a-100A3	1a-100A3	1a-100A3	1a-100A3	1a-100A3	1a-100A3	ASTM D 130
Rust prevention		pass B	pass B	pass B	pass B	pass B	pass B	ASTM D 665
Ageing behavior,
viscosity increase	%	1	1	1	1	1	1	ASTM D 2893
precipitation number increase	ml	< 0.05	< 0.05	< 0.05	< 0.05	< 0.05	< 0.05	ASTM D 2893
FZG mechanical gear rig test	load stage	12	12	12	12	12	12	DIN 51 354-2
Effect on SRE-NBR 1 seal material acc to DIN 53 538-1 at 100 °C +/– 1 °C after 7 days +/– 2 hours,
relative volume change	%	7	7	7	7	7	7	DIN 53 521 together with DIN 53 505
change in Shore A hardness	Shore	- 3	- 3	- 3	- 3	- 3	- 3	DIN 53 521 together with DIN 53 505

福斯齒輪油RENOLIN CKC100,CKC150,CKC220,CKC320,CKC460,CKC680